« previous next »
Pages: [1]

Author Topic: Wheels question  (Read 344 times)

Offline Schatzman

  • Posts: 258
    • http://www.rocknrenew.com
    • Email
Wheels question
« on: November 07, 2009, 01:06:06 PM »
OK, so i have a set of steel wheels that are 16 x 7.5, bolt pattern 5 on 4 3/4. The question is will these fit my P38?

So the P38 bolt pattern is suppose to be 5x120mm. So that means
120mm=4.72440945
these are 5x4.750.
is that .03 going to make it not fit properly?
Logged
-Andrew Schatz
2002 P38 4.6 HSE
1972 BMW R75/5 Toaster
1974 BMW 2002 Tii
1984 Alfa Romeo Spider

Offline CliftonRover

  • Sr. Member
  • ****
  • Posts: 318
    • Email
Wheels question
« Reply #1 on: November 08, 2009, 11:21:56 PM »
it might, but just give one a test fit.
Logged

Offline nateb006

  • Posts: 14
    • Email
Wheels question
« Reply #2 on: November 16, 2009, 07:12:36 AM »
Quote from: Schatzman;18952
OK, so i have a set of steel wheels that are 16 x 7.5, bolt pattern 5 on 4 3/4. The question is will these fit my P38?

So the P38 bolt pattern is suppose to be 5x120mm. So that means
120mm=4.72440945
these are 5x4.750.
is that .03 going to make it not fit properly?


Should fit, I know a few Disco owners that go through the same deal and they seem to be ok.  When you actually mount that wheel the difference gets split over all five studs and ends up being very minimal.

Take Care,
-Nate
Logged
Pages: [1]
« previous next »