Range Rover Classic Parts

[CliftonRover]

I have a ton of rangie parts that I am looking to get rid of very cheap.  I have hoods, grills, doors (LWB and SWB), seats(heated leather), 10 spline axles diffs and housings, injectors, intakes.  the parts are off an 81, early 89, late 89, and 94 LWB.  I have 2 motors, 1 auto tranny, 89 heater core, lenses, windshields and more.  let me know what you need and spread the word, my barn is not liking the weight on its top floor.

[KevinNY]

I need a tailgate handle.

[CliftonRover]

for the lift gate? I am going home this weekend and I will check out the sondition of them.

I also have an aluminum lift gate conversion put together that I will sell after romp if anyone is interested.

[KevinNY]

Yep the liftgate handle.

[Greatdivide1]

Do you have the ecm for the 4.2?? or the motor??

[CliftonRover]

the motor and tranny were the only pieces the truck did not come with.  I didn't take the ecu out before I crushed the truck with the backhoe so no.  guess I should have thought of that.

[cellulararrest]

damn. I would've been interested in the 4.2 ECU.

[Ethan Palmer]

hey i was at your gathering in November your barn was full then cant think of what it looks like now lol do you have a good alternator kickin' around mine is shot cant hardly work the heat and lights at the same time.. its a project.. if you got anything let me know im always in need of stupid parts so ill be in touch.. still finding the money for calipers.. right now my rangies out of commission new ones are mad $$ got any decent ones? i might just go all new anyway though cause i bought new rotors and pads.. the works tying to get it all in before romp.. thanks-

[Greatdivide1]

hey do you have a ignition cylinder?? and maybe a matching door handle???

[CliftonRover]

Ethan I have some 97 disco calipers, and some 81, early and late 89 calipers.  I have and alternator too, but it might not work, its from an 89, call rovers north and ask Les or Aurthur if the stuff will work.  your truck would do really well at romp we will try to figure it out.  why do you need new calipers.  i bought new ones before i know you could rebuild them, I could help you do this this weekend if you want. it was like 700 of more for all 4, but it was nice to have new stuff......

I don't think I have the key to the ignition anymore but i can look, it is from an early 89, the door latch would probably come with a door attached as I don't want to take it apart.

[Kevin88RRC]

I also have an aluminum lift gate conversion put together that I will sell after romp if anyone is interested.

What are you looking to get for the aluminum gate?
Also, I need a left rear bumper end cap.

[buick3.9]

how much do you want for injectors..

[Greatdivide1]

hey forest do you have a passenger side power seat adjuster?? i dont care the color mines busted.

[CliftonRover]

the aluminum tailgate kit from rovers north is pricey, I have put it together installed the glass and parts.  it has been on my truck for 2 years.  pm me and make an offer.  

for the injectors I am not looking for much, pm me an offer

Don the seat adjuster I have is on a tan 94 heated rrc seat.  it worked when i took it out of the truck.  I kinda feel bad taking the switch off the seat but I would seel the whole seat for 45 bucks.

[Kevin88RRC]

the aluminum tailgate kit from rovers north is pricey, I have put it together installed the glass and parts.  it has been on my truck for 2 years.  pm me and make an offer.

PM sent